My raid-10 speed seems slow when test using hdparm

See http://tldp.org/HOWTO/Software-RAID-HOWTO-9.html

To check out speed and performance of your RAID systems, do NOT use hdparm. It won't do real benchmarking of the arrays.

Instead of hdparm, take a look at the tools described here: IOzone and Bonnie++.

Помог ли вам данный ответ?

 Распечатать статью

Также читают

How do I assign additional IP addresses in RedHat/CentOS?

If you are using CPanel, you should add the IP addresses through WHM.  Do not follow...

How to install Windows VPS under Hypervm

After you follow this http://wiki.lxcenter.org/HyperVM-Windows and still problems below:1....

How to re-install Centos yourself remotely

NOTE: This is only for Dedicated Servers. All VPS, go to client area.Assuming you currently have...

Why my drive is slow

First, check to make sure write cache is enabled. On Centos, you type hdparm -I /dev/sda Then...

How to reboot a unix server via telnet?

Using a telnet program like http://www.telnet98.com/ or SSH Client like putty (for windows),...